বার্তা পাঠান
বাড়ি খবর

কোম্পানির খবর কেবল ট্রে ইনস্টল করার সময় মনোযোগ দিন

সাক্ষ্যদান
চীন Cangzhou Best Machinery Co., Ltd সার্টিফিকেশন
চীন Cangzhou Best Machinery Co., Ltd সার্টিফিকেশন
ক্রেতার পর্যালোচনা
আমি Cangzhou BEST Machinery Co., Ltd এর সাথে খুশি। খুব পেশাদার এবং reiable কারখানা। তারা ভাল মানের মেশিন এবং ভাল বিক্রয় সার্ভার অফার করে, তাদের সাথে আবার সহযোগিতা করার জন্য সামনের দিকে তাকান।

—— ময়ো

Cangzhou BEST মেশিনারি কো., লিমিটেডের মেশিন খুব ভাল, এবং উত্পাদন দ্রুত, বিতরণ দ্রুত। খুব টার্স্টফুল কোম্পানি।

—— অক্টাভিও

আপনার সদয় আতিথেয়তার জন্য ধন্যবাদ. আপনার কোম্পানী খুব পেশাদার, আমরা নিকট ভবিষ্যতে চমৎকার সহযোগিতা হবে.

—— ক্রিস্টিয়ান

খুব ভাল কোম্পানি। খুব ভাল যোগাযোগের মাধ্যমে সমস্ত সমস্যা সমাধান করা হয়েছে, আমার ক্রয় নিয়ে সন্তুষ্ট।

—— স্পেন্স

very professional factory, realiable, happy with them

—— Samuel

ভাল বিক্রয় পরিষেবা, ডেলিভারি সময় দ্রুত। ভাল যোগাযোগ।

—— আলী

তোমার দর্শন লগ করা অনলাইন চ্যাট এখন
কোম্পানির খবর
কেবল ট্রে ইনস্টল করার সময় মনোযোগ দিন

তারের ট্রেগুলির ইনস্টলেশন সম্পর্কে কয়েকটি নোট:
(1). (1)। Visual inspection চাক্ষুষ পরিদর্শন
When the cable tray enters the construction site, the following materials should be submitted to the factory, the product quality certificate, the periodic inspection report of the provincial and municipal quality supervision station, and the relevant technical identification documents. যখন তারের ট্রেটি নির্মাণ সাইটে প্রবেশ করে, নিম্নলিখিত উপকরণগুলি কারখানায়, পণ্য মানের শংসাপত্র, প্রাদেশিক এবং পৌরসভা মানের তদারকি কেন্দ্রের পর্যায় পরিদর্শন প্রতিবেদন এবং সম্পর্কিত প্রযুক্তিগত সনাক্তকরণ নথি জমা দিতে হবে। The thickness of the cable tray plate should meet the relevant requirements. তারের ট্রে প্লেটের বেধটি প্রাসঙ্গিক প্রয়োজনীয়তা মেটাতে হবে। The coating surface of the hot-dip galvanized cable bridge should be uniform without defects such as over-burning, ash hang, and local ungalvanized. হট-ডিপ গ্যালভেনাইজড ক্যাবল ব্রিজের লেপ পৃষ্ঠটি ওভার-বার্নিং, অ্যাশ হ্যাং এবং স্থানীয় ungalvanized এর মতো ত্রুটি ছাড়াই অভিন্ন হওয়া উচিত। Electrostatic spraying should be flat, smooth, uniform, skinless, no bubbles, blister bridge itself should be flat, without distortion, the inner wall should be smooth, no burrs, the weld surface of the bridge should be uniform, no leakage, cracks, burn-through, etc. defect. ইলেক্ট্রোস্ট্যাটিক স্প্রেটি সমতল, মসৃণ, অভিন্ন, ত্বকবিহীন, কোনও বুদবুদ নয়, ফোস্কা সেতু নিজেই সমতল হওয়া উচিত, কোনও বিকৃতি ছাড়াই, অভ্যন্তরের প্রাচীরটি মসৃণ হওয়া উচিত, কোনও গর্ত নেই, সেতুর ওয়েল্ড পৃষ্ঠটি সমান হওয়া উচিত, কোনও ফুটো, ফাটল, বার্ন-থ্রু ইত্যাদির ত্রুটি
(2). (2)। Installation position of cable bridge তারের সেতু ইনস্টলেশন অবস্থান
When the bridge is laid horizontally, the height from the ground should generally not be less than 2.5m. যখন সেতুটি অনুভূমিকভাবে স্থাপন করা হয়, তখন জমি থেকে উচ্চতা সাধারণত 2.5 মিটারের কম হওয়া উচিত নয়। When laying multiple layers of the bridge, in order to dissipate heat, maintain and prevent interference, a certain distance should be left between the layers of the bridge. ব্রিজের একাধিক স্তর রাখার সময়, তাপকে ছড়িয়ে দিতে, বজায় রাখা এবং হস্তক্ষেপ রোধ করার জন্য, সেতুর স্তরগুলির মধ্যে একটি নির্দিষ্ট দূরত্ব রেখে দেওয়া উচিত। When the cable bridge is laid in parallel with various pipelines, its clear distance should meet the relevant regulations. যখন তারের সেতুটি বিভিন্ন পাইপলাইনের সাথে সমান্তরালে স্থাপন করা হয়, তখন এর সুস্পষ্ট দূরত্বটি প্রাসঙ্গিক বিধিবিধানগুলি মেটানো উচিত।
(3). (3)। Installation of support and hanger সমর্থন এবং হ্যাঙ্গার ইনস্টলেশন
The quality of the support and hanger of the cable bridge should conform to the current relevant technical standards. তারের সেতুর সমর্থন এবং হ্যাঙ্গারের গুণমানটি বর্তমান প্রাসঙ্গিক প্রযুক্তিগত মানগুলির সাথে সঙ্গতিপূর্ণ হওয়া উচিত। When the cable bridge is laid horizontally, the support span is generally 1.5 ~ 3m. যখন তারের সেতুটি অনুভূমিকভাবে স্থাপন করা হয়, তখন সমর্থন স্প্যানটি সাধারণত 1.5 ~ 3 মিটার হয়। When trying vertical laying, the fixed distance should not be greater than 2m. উল্লম্ব স্তর দেওয়ার চেষ্টা করার সময়, নির্ধারিত দূরত্ব 2 মিটারের বেশি হওয়া উচিত নয়। The horizontal height difference between the two adjacent bridge support arms Should not be greater than 10mm, the vertical deviation of the vertical centerline of the two adjacent bridge support arms should not be greater than 20mm. দুটি সংলগ্ন ব্রিজ সমর্থন বাহুগুলির মধ্যে অনুভূমিক উচ্চতার পার্থক্য 10 মিমি থেকে বেশি হওয়া উচিত নয়, দুটি সংলগ্ন সেতু সমর্থনকারী বাহুর উল্লম্ব কেন্দ্ররেখার উল্লম্ব বিচ্যুতি 20 মিমি থেকে বেশি হওয়া উচিত নয়।

 

পাব সময় : 2020-05-09 09:14:54 >> খবর তালিকা
যোগাযোগের ঠিকানা
Cangzhou Best Machinery Co., Ltd

ব্যক্তি যোগাযোগ: Mr. Arno Hao

টেল: +8618717894416

আমাদের সরাসরি আপনার তদন্ত পাঠান (0 / 3000)