বার্তা পাঠান
বাড়ি খবর

কোম্পানির খবর ফ্লোরো শিট মেশিনের ব্যবহার ডেকিং

সাক্ষ্যদান
চীন Cangzhou Best Machinery Co., Ltd সার্টিফিকেশন
চীন Cangzhou Best Machinery Co., Ltd সার্টিফিকেশন
ক্রেতার পর্যালোচনা
আমি Cangzhou BEST Machinery Co., Ltd এর সাথে খুশি। খুব পেশাদার এবং reiable কারখানা। তারা ভাল মানের মেশিন এবং ভাল বিক্রয় সার্ভার অফার করে, তাদের সাথে আবার সহযোগিতা করার জন্য সামনের দিকে তাকান।

—— ময়ো

Cangzhou BEST মেশিনারি কো., লিমিটেডের মেশিন খুব ভাল, এবং উত্পাদন দ্রুত, বিতরণ দ্রুত। খুব টার্স্টফুল কোম্পানি।

—— অক্টাভিও

আপনার সদয় আতিথেয়তার জন্য ধন্যবাদ. আপনার কোম্পানী খুব পেশাদার, আমরা নিকট ভবিষ্যতে চমৎকার সহযোগিতা হবে.

—— ক্রিস্টিয়ান

খুব ভাল কোম্পানি। খুব ভাল যোগাযোগের মাধ্যমে সমস্ত সমস্যা সমাধান করা হয়েছে, আমার ক্রয় নিয়ে সন্তুষ্ট।

—— স্পেন্স

very professional factory, realiable, happy with them

—— Samuel

ভাল বিক্রয় পরিষেবা, ডেলিভারি সময় দ্রুত। ভাল যোগাযোগ।

—— আলী

তোমার দর্শন লগ করা অনলাইন চ্যাট এখন
কোম্পানির খবর
ফ্লোরো শিট মেশিনের ব্যবহার ডেকিং
সর্বশেষ কোম্পানির খবর ফ্লোরো শিট মেশিনের ব্যবহার ডেকিং

মেঝে সমর্থন সরঞ্জাম অপারেশন পরিচয়

The operation of the floor support equipment is briefly introduced. মেঝে সমর্থন সরঞ্জাম ক্রিয়াকলাপ সংক্ষেপে চালু করা হয়। The floor support equipment must first install the following steel beams and then lay the floor support plate on the steel beam. মেঝে সমর্থন সরঞ্জামে প্রথমে নিম্নলিখিত স্টিলের বীমগুলি ইনস্টল করতে হবে এবং তারপরে ইস্পাত রশ্মিতে মেঝে সমর্থন প্লেটটি রাখা উচিত। The contact between the floor support plate and the steel beam is generally anchored with anchors. মেঝে সমর্থন প্লেট এবং ইস্পাত মরীচিগুলির মধ্যে যোগাযোগ সাধারণত অ্যাঙ্গরগুলির সাথে নোঙ্গর করা হয়। As for welding: floor support The slab laying is connected with the steel beam, the end of the slab is penetrated by spot welding with the steel beam, the pierce and the steel beam are penetrated and welded in the middle, and the special clamping pliers are used to connect the floor between the floor plates. Ldালাইয়ের জন্য হিসাবে: মেঝে সমর্থন স্ল্যাব বিছানো ইস্পাত রশ্মির সাথে সংযুক্ত থাকে, স্ল্যাবের শেষটি স্টিলের মরীচি দিয়ে স্পট ldালাই দ্বারা অনুপ্রবিষ্ট হয়, পিয়ার্স এবং ইস্পাত মরীচিটি মাঝখানে ratedুকে এবং ঝালাই করা হয়, এবং বিশেষ ক্ল্যাম্পিং প্লাসগুলি মেঝে প্লেটগুলির মধ্যে মেঝে সংযোগ করতে ব্যবহৃত হয়।

The floor support board equipment must first install the following steel beams, and then lay the floor support board on the steel beam, and the contact part between the floor support board and the steel beam is generally anchored with anchors. মেঝে সমর্থন বোর্ড সরঞ্জামগুলি প্রথমে নিম্নলিখিত স্টিলের বীমগুলি ইনস্টল করতে হবে এবং তারপরে ইস্পাত বিমের উপর মেঝে সমর্থন বোর্ডটি রাখবে এবং মেঝে সমর্থন বোর্ড এবং ইস্পাত মরীচিগুলির মধ্যে যোগাযোগের অংশটি সাধারণত নোঙ্গরযুক্ত থাকে। As for welding: the floor support board is laid and connected with the steel beam, and the board end The penetration welding of the head and the steel beam, and the penetration welding of the peg and the steel beam in the middle, Ldালাই হিসাবে: মেঝে সমর্থন বোর্ড স্থাপন এবং ইস্পাত মরীচি সঙ্গে সংযুক্ত করা হয়, এবং বোর্ড শেষ মাথা এবং ইস্পাত মরীচি অনুপ্রবেশ ldালাই, এবং খোঁচার andালাই এবং মাঝখানে ইস্পাত মরীচি,

The floor slabs are connected with special clamping pliers to engage the pressure holes, and the plugs are spot welded to the floor slabs and steel beams with special galvanized plugs. মেঝে স্ল্যাবগুলি চাপযুক্ত গর্তগুলিতে নিযুক্ত করার জন্য বিশেষ ক্ল্যাম্পিং প্লাসগুলির সাথে সংযুক্ত থাকে এবং প্লাগগুলি স্পেশাল ফ্ল্যাশ স্ল্যাবগুলিতে এবং বিশেষ গ্যালভানাইজড প্লাগগুলি সহ স্টিলের বীমগুলিতে ঝালাই করা হয়। If it is an arc-shaped area, the special shape cutting of the floor slabs is cut by a plasma cutting machine , The incision is smooth, and the surface galvanized layer is complete. যদি এটি একটি চাপ-আকৃতির অঞ্চল হয় তবে ফ্লোর স্ল্যাবগুলির বিশেষ আকার কাটা প্লাজমা কাটিয়া মেশিন দ্বারা কেটে নেওয়া হয়, চিরাটি মসৃণ হয় এবং পৃষ্ঠের জালযুক্ত স্তর সম্পূর্ণ is

পাব সময় : 2020-05-14 09:31:52 >> খবর তালিকা
যোগাযোগের ঠিকানা
Cangzhou Best Machinery Co., Ltd

ব্যক্তি যোগাযোগ: Mr. Arno Hao

টেল: +8618717894416

আমাদের সরাসরি আপনার তদন্ত পাঠান (0 / 3000)